How to Clean Selenite: Simple Steps for Shimmering Stones


To clean selenite, use a dry cloth or brush to gently wipe away any dirt or debris. Selenite is a beautiful crystal variety commonly used for its spiritual and metaphysical properties.

However, over time, these crystals may accumulate dirt, dust, or other particles that can dull its natural shine and energy. That’s why it’s important to know how to properly clean selenite to maintain its beauty and properties. In this article, we’ll explore the different methods you can use to cleanse and purify your selenite crystals, including dry cleaning, using sound vibrations, and the power of the moon.

Whether you’re a seasoned crystal practitioner or just starting, these tips will help you keep your selenite in tip-top shape.

How to Clean Selenite: Simple Steps for Shimmering Stones


Why Clean Selenite

Discussion Of The Purpose Of Cleaning Selenite

Selenite is a stunning crystal often used to promote calmness and clarity. However, to maintain its purpose, it is essential to keep your selenite clean regularly. Cleaning ensures the crystal remains energetically pure and open to receiving positive vibrations. If dirty, the crystal will form an unwanted barrier that blocks energy transmission.

Explanation Of The Adverse Effects Of Not Cleaning Selenite Regularly

If you ignore cleaning your selenite regularly, it may result in adverse effects as follows:

  • The crystal’s energy may decrease and become sticky or muddy, limiting its usefulness in promoting calmness and clarity.
  • The dirt may cause small scratches on the crystal’s surface, which can trap negative energy and hamper its experience-giving capability.
  • The crystal may break or crack if the dirt accumulates for an extended period without cleaning, resulting in the complete loss of its energy properties.

Therefore, it is vital to make it a habit to clean your selenite regularly to gain maximum benefits and extend the crystal’s lifespan.

Now that we’ve established why cleaning selenite is essential let’s move on to the next section, which delves into the significance of cleaning selenite with water.

Materials Needed

Selenite is a delicate crystal that requires proper cleaning to maintain its unique properties. It is always recommended to clean selenite crystals to remove any impurities and protect their energy. In this blog post, we will discuss the materials needed to clean selenite and their significance.

List Of Materials Needed To Clean Selenite

Cleaning selenite is a simple process that requires very few materials. Here is a list of materials needed to clean selenite:

  • Distilled or purified water
  • Soft-bristled brush
  • Microfiber cloth
  • Selenite wand
  • Selenite charging plate

Let’s take a look at each of these materials and their significance in the cleaning process.

Distilled Or Purified Water

Selenite is a soft crystal that is sensitive to water and can be damaged by impurities or chemicals. It is essential to use distilled or purified water to clean selenite to avoid any reaction with impurities. These types of water are free of minerals, chlorine, and other harmful substances, making them ideal for cleaning selenite crystals.

Soft-Bristled Brush

Sometimes, selenite crystals can have stubborn dirt and grime on their surface that needs to be removed. A soft-bristled brush can be used to gently brush away any dirt or impurities without damaging the crystal. It is essential to use a soft-bristled brush that won’t scratch or chip the selenite’s surface.

Microfiber Cloth

A microfiber cloth is an excellent material for cleaning selenite because it is gentle and won’t leave any lint or residue behind. You can use a microfiber cloth to wipe away any loose dirt or impurities on the crystal’s surface.

Selenite Wand

Selenite wands are used to cleanse and purify crystals. These wands are made of selenite and can be used to charge and remove any negative energy from selenite crystals. To clean your selenite crystal, you can hold it in your hand and stroke it gently with the selenite wand.

Selenite Charging Plate

A selenite charging plate is an ideal tool for charging and cleansing selenite crystals. These plates are made of selenite and can be used to charge many crystals at once, including selenite. Simply place your selenite crystal on the charging plate, and let it sit for a few hours to recharge its energy.

Cleaning selenite crystals is a simple process that requires very few materials. Using distilled or purified water, a soft-bristled brush, microfiber cloth, selenite wand, and selenite charging plate can help to maintain the crystal’s unique properties and protect its energy.

With these materials, you can help care for your selenite crystals for a lifetime.

Steps To Clean Selenite

Step By Step Guide To Cleaning Selenite Properly

Selenite is stunning, translucent stone that is a popular choice for crystal-lovers everywhere, known for its powerful energy-cleansing abilities. To keep this beautiful stone looking its best, it’s important to clean it regularly. Here’s a step-by-step guide:

Step 1: Gently Dust The Selenite

Before beginning the cleaning process, use a soft cloth or brush to remove any surface dirt or debris. Be gentle to avoid scratching the delicate surface.

Step 2: Use Saltwater Solution

Mix a saline solution of warm water and salt in a bowl, using a ratio of one cup of water to a teaspoon of salt. Stir it until the salt is dissolved.

Step 3: Immerse The Selenite In The Solution

Place the selenite into the bowl of saline solution, ensuring that it is completely covered. Leave it to soak for approximately an hour.

Step 4: Dry The Selenite

Remove the stone from the solution and carefully pat it dry with a soft cloth. Avoid rubbing the stone too hard to prevent damaging it.

Step 5: Charge The Selenite

Place the stone in a spot where it can absorb sunlight or moonlight for at least 24 hours. This will recharge the crystals’ energy and leave it with a sparkling shine.

By following these steps regularly, you can keep your selenite crystal sparkling clean and filled with vibrant energy. Remember to be gentle when handling this delicate stone and use natural cleaning methods to avoid damaging it.

Additional Tips For Cleaning Selenite

Selenite is a beautiful translucent crystal that is believed to possess numerous healing properties. It is often used in meditation and as a decorative piece in homes. However, with time and usage, selenite can become dirty and lose its shine.

In this blog post, we will explore some additional tips and tricks for cleaning selenite effectively.

Explanation Of Additional Tips And Tricks For Cleaning Selenite Effectively

  • Selenite is a delicate crystal that can easily scratch or break. To avoid damaging it, always use a soft-bristled brush to clean it.
  • While water is often recommended for cleaning crystals, it is important to note that selenite is a water-soluble crystal and can easily dissolve when exposed to water. Therefore, it is best to use a dry cloth to clean it.
  • Selenite is sensitive to heat, so it is important to keep it away from direct sunlight or other heat sources when cleaning it.
  • To remove stubborn dirt or stains, you can use an eraser to gently rub it off. Be sure to avoid using abrasive materials that can scratch or damage the crystal’s surface.

Discussion Of Common Mistakes When Cleaning Selenite And How To Avoid Them

  • Using water to clean selenite is a common mistake that many people make. As mentioned earlier, selenite is water-soluble and can easily dissolve when exposed to water. Therefore, it is best to use a dry cloth or a soft-bristled brush to clean it.
  • Another common mistake is using abrasive materials such as scrubbers, harsh chemicals, or even toothpaste to clean selenite. These materials can scratch or damage the crystal’s surface. It is important to use gentle materials and methods when cleaning selenite to avoid any damage.
  • Heat exposure is also a common mistake when cleaning selenite. Direct sunlight or other heat sources can damage selenite and cause it to fade or even break. Be sure to keep it away from heat sources when cleaning it.

Cleaning selenite can be a simple task if done correctly. By using gentle materials, avoiding abrasive methods, and keeping selenite away from water and heat sources, you can effectively clean and maintain its beauty.

Frequently Asked Questions On How To Clean Selenite

How Do I Clean Selenite Without Damaging It?

To clean selenite, avoid using water or any liquid. Instead, use a soft cloth or brush to dust it off gently. You can also use a dry, soft-bristled toothbrush to remove dirt and debris from nooks and crevices.

Can I Submerge My Selenite Crystal In Water?

No. Selenite is a soft and fragile stone that can dissolve if exposed to water or other liquids. Prolonged exposure to water can also cause it to break down, lose its shine, or even crumble.

How Do I Remove Stains From My Selenite Crystal?

If your selenite crystal has stains, gently rub a soft-bristled toothbrush or cloth dipped in warm soapy water on the stained area. Be sure to rinse the crystal with clean water and dry thoroughly with a soft, clean cloth.

Can I Use Chemical Solutions To Clean My Selenite?

We do not recommend using chemical solutions or any abrasive materials to clean selenite. These can damage or erode the crystal’s surface, leading to permanent scratches or discoloration.

How Often Should I Clean My Selenite Crystal?

Selenite doesn’t require frequent cleaning as it has a self-cleansing property. However, you can touch it up with a cloth or brush once a month to keep it looking its best. Always handle selenite with care to prevent damage.


As you can see, cleaning selenite is simple and can be done with items you likely already have at home. It’s essential to clean your selenite often to ensure it maintains its beauty and metaphysical properties. Whether you use it for crystal healing or decorative purposes, caring for your selenite will guarantee it lasts for years.

Remember to be gentle when cleaning your selenite and avoid using chemical cleaners or water. Instead, opt for using a soft-bristled brush and some dry, uncooked rice to remove any dirt or dust. With this guide, you now have the knowledge to keep your selenite in pristine condition and get the most out of its abilities.

Happy cleaning!

Latest articles


Related articles

Leave a reply

Please enter your comment!
Please enter your name here