To drain gas from an ariens snowblower, locate the fuel valve and drain it using a container. Ariens snowblowers are a reliable and powerful choice for clearing snow from sidewalks, driveways, and other outdoor areas.
However, when performing maintenance on your snowblower, it may be necessary to drain the gas from the tank. The process of draining fuel from an ariens snowblower is simple and straightforward, but it should be done carefully to avoid making a mess or damaging the machine.
In this article, we will explain how to drain gas from an ariens snowblower in a safe and efficient manner. We will also discuss important tips for preparing your snowblower for the winter season and for keeping it in good working condition.
Understanding The Importance Of Draining Gas From Your Ariens Snowblower
Why It’S Important To Drain Gas From Your Ariens Snowblower
Maintaining your ariens snowblower is essential to ensure that it remains in optimal condition for future use. Draining gas from your snowblower is a crucial part of this process as it eliminates stale fuel, which can cause your engine to malfunction, making it difficult to start and operate.
Here are some reasons why it’s important to drain gas from your ariens snowblower:
- Stale fuel: If you don’t use your snowblower frequently, the fuel in the tank will eventually become stale. Stale fuel gums up the carburetor, which restricts fuel flow into the engine, leading to starting problems and low engine performance.
- Blockages: The fuel that sits in the carburetor can accumulate and create a blockage, leading to potential long-term damage to the carburetor.
- Improved safety: Draining gas is also essential to prevent gasoline accidents. Leaking fuel can be a potential fire hazard.
- Maintenance: Regular draining of fuel is essential for long term maintenance of your ariens snowblower and its engine.
When To Drain The Gas
Now that you know the importance of draining gas from your ariens snowblower, the next step is to know when to do it. Here are a few situations that require you to drain the gas:
- End of season: When you know that you are done using your snowblower for the season, drain the gas and store it away until next year.
- Period of inactivity: If you know that it will be a while before using your snowblower again, drain the gas to prevent clogging and seizing of the carburetor.
- Before refueling: It is also important to drain the gas before refueling to prevent contamination and ensure a clean engine.
Additionally, following the ariens operation manual for your specific snowblower model is recommended as the correct instructions and procedures may vary.
Tools And Equipment You Need
Are you feeling stressed out because of a gas-filled ariens snowblower that’s making your life a living hell? Well, worry no more because in this guide, we’ll show you how to drain gas from your ariens snowblower. In this section, we’ll cover the various tools and equipment needed for this task, as well as safety precautions to follow.
What Tools And Equipment Are Necessary To Drain Gas From Your Ariens Snowblower
If you’re thinking of draining the gas from your ariens snowblower, then you’ll need the following tools and equipment:
- Drain pan: This helps you collect the gas that comes out of the snowblower.
- Safety gloves: These are essential to protect your hands from any spillages.
- Safety goggles: These will protect your eyes from any splashes.
- Cloths: You’ll need some old rags or towels to clean up any spills.
- Screwdriver: You’ll need this tool to remove the screws holding the fuel tank in place.
- Funnel: This optional tool helps you to pour back the unused gas in the fuel tank.
Safety Precautions Before Starting
It’s essential to observe the following safety precautions before draining the gas from your ariens snowblower:
- Always disconnect the spark plug wire to prevent accidental starts.
- Do not try to drain gas from your snowblower when the engine is still hot or when it’s running.
- Work in an open space or a well-ventilated area to avoid inhaling any toxic fumes.
- Have a fire extinguisher nearby as a precautionary measure.
- Wear gloves and goggles to protect yourself from any injuries or spillages.
Now that you know what tools and equipment you’ll need and the safety precautions you should follow, let’s move on to the actual task of draining gas from your ariens snowblower!
Steps To Draining Gas From Your Ariens Snowblower
Step-By-Step Guide To Draining The Gas From Your Ariens Snowblower
Is your ariens snowblower running poorly? It’s essential to drain the gas regularly to ensure that your snowblower works correctly in the winter months. Follow these simple steps to drain the gas from your ariens snowblower:
- Turn off the ignition switch and allow the engine to cool down.
- Locate the fuel tank under the snowblower’s hood.
- Remove the fuel cap and check the fuel level. If there is any fuel left in the tank, pour it into an approved gas container.
- Locate the fuel shut-off valve on the fuel line, and turn it to the “off” position. You can locate the fuel line by tracing it from the fuel tank to the carburetor.
- Unscrew the fuel line from the carburetor using a pair of pliers or a wrench.
- Aim the fuel line into the gas container, and let the remaining fuel drain out.
- Reconnect the fuel line to the carburetor carefully.
- Refill the fuel tank with fresh gas, and screw the fuel cap back onto the tank.
Tips And Tricks For Making The Process Easy
Draining gas from your ariens snowblower may seem like a difficult task, but following the tips and tricks below can make the process more manageable:
- Always drain the gas from your snowblower before the winter months.
- Use an approved gas container to store the old gas safely.
- Use a pair of pliers or a wrench to avoid damaging the fuel line or carburetor.
- Wear gloves to protect your hands from gasoline spills.
- You can use a siphon kit to drain gas quickly.
- Check your owner’s manual for specific instructions on how to drain gas from your snowblower.
- Regularly clean the carburetor and fuel line to avoid any clogs or damage.
By following these steps and tips, you can ensure that your ariens snowblower is ready to use when snow falls.
Cleaning And Maintaining Your Ariens Snowblower After Draining The Gas
After draining the gas from your ariens snowblower, it’s essential to ensure you clean and maintain it correctly to prolong its life. Here are some tips on what to do after draining the gas to keep your snowblower in tip-top shape for winters to come:
What To Do After Draining The Gas
- Remove the spark plug and add a teaspoon of oil to the cylinder to preserve the engine.
- Disconnect the fuel line and carefully inspect it for any cracks or leaks before reconnecting it.
- Remove the air filter and check for excessive dirt or debris, cleaning or replacing as necessary.
- Inspect the belts and pulleys for any signs of wear or damage, replacing as necessary.
- Check all nuts and bolts to ensure they are tight and secure, tightening as necessary.
How To Clean And Store Your Ariens Snowblower
To ensure your snowblower is fully prepared for the next winter season, follow these steps:
- Clean any remaining dirt or debris from the snowblower’s exterior, being sure to avoid using water as it can cause damage to the electrical components.
- Use a soft-bristled brush to clean the inside of the snowblower’s housing, clearing out any remaining snow or debris.
- Apply a protective coating of lubricating oil inside the housing to prevent rust and corrosion.
- Store your snowblower in a dry, well-ventilated area, away from any flammable materials.
- Empty the fuel tank and run the engine until it stops to prevent any leftover fuel from gumming up the carburetor.
By following these simple steps after draining the gas from your ariens snowblower, you can rest easy knowing that your snowblower is ready for the next winter season. Proper cleaning and maintenance go a long way in prolonging the life of your snowblower and ensuring it runs smoothly when you need it most.
Frequently Asked Questions About Draining Gas From Ariens Snowblower
Commonly Asked Questions About Draining Gas From Your Ariens Snowblower
If you own an ariens snowblower, you may occasionally need to remove the gas from it. This is to prevent gas that has been sitting in the machine for long periods from becoming stale and causing damage to your engine.
Here are the most frequently asked questions about draining gas from an ariens snowblower:
- How often should i drain the gas from my ariens snowblower?
- How do i drain the gas from my ariens snowblower?
- Can i leave the gas in my ariens snowblower during the off-season?
- Do i need to use a fuel stabilizer after draining the gas from my ariens snowblower?
- What should i do with the old gas after i drain it from my ariens snowblower?
Expert Answers And Tips For Maintaining Your Snowblower
Now that we have answered the most commonly asked questions about draining gas from your ariens snowblower, it is important to know the essential tips for keeping your snowblower at its best performance. Here are some expert answers:
- Change the oil: The recommended oil change interval for ariens snowblowers is every 25 hours of use. The engine oil lubricates the engine and reduces friction, and maintains engine components clean.
- Check the spark plug: A clean spark plug is important for starting the engine, and the recommended interval for checking the spark plug is every 50 hours of use.
- Clean the machine: Salt, dirt and debris can accelerate the wear and tear of your snowblower and cause damage over time. A quick brush down with a broom and a wipe with a damp cloth is enough to do the trick.
- Lubricate moving parts: Any moving part needs to be lubricated, to protect against rust and corrosion. Use a light-weight oil or spray lubricant to keep your moving parts working smoothly.
Recap Of The Article
We covered the frequently asked questions about draining gas from ariens snowblowers, and also provided expert tips to maintain your machine properly. We discussed how often to drain the gas, how to do it, and what to do with the old gas.
We also highlighted the importance of oil changes, spark plugs, machine cleaning and lubricating moving parts.
Final Thoughts On The Importance Of Draining Gas From Your Ariens Snowblower
Keeping your ariens snowblower running smoothly is crucial for effective snow removal. Regular maintenance is essential, and that includes draining the gas to prevent the engine from wear and tear. By following these tips, you will keep your snowblower running efficiently for years to come.
Don’t forget that proper maintenance on your machine will not only saves you money on costly repairs, but also ensures your machine is in excellent working condition when the snow starts to fall.
Frequently Asked Questions Of How To Drain Gas From Ariens Snowblower
How Do I Drain Gas From My Ariens Snowblower?
To drain gas from your ariens snowblower, locate the fuel valve and turn it off. Remove the fuel line, and tip the snowblower to drain the remaining gas.
Is It Necessary To Drain Gas From My Snowblower Before Storing It?
Yes, it is essential to drain the gas from your snowblower before storing it. Gas left in the tank for an extended period can damage the engine and other parts of the snowblower.
How Often Should I Drain The Gas From My Snowblower?
You should drain the gas from your snowblower after every season of use. It is also recommended to run the engine until it stops to remove any leftover gas in the carburetor.
Can I Use The Leftover Gas In My Snowblower For My Lawnmower?
The leftover gas in your snowblower might not be suitable for use in your lawnmower. It is recommended to dispose of the fuel safely and use fresh gas in your lawnmower.
What If The Gas Does Not Drain From The Snowblower?
If the gas does not drain from your snowblower, try removing the fuel line and cleaning it thoroughly. If this does not work, contact a professional for help.
As we conclude our guide on how to drain gas from your ariens snowblower, we hope that you found it useful and informative. Taking care of your machinery is essential for the longevity and efficiency of the machine, and draining gas is a vital part of it.
Remember to follow all safety guidelines while performing this task. If you feel unsure or uncomfortable, it is always best to seek professional help. Don’t hesitate to ask for assistance if needed. Regular maintenance and care of your snow blower will save you time, money, and frustration in the long run.
Keeping your machinery in top shape will ensure that it performs efficiently and effectively, even under harsh winter conditions. Happy snow clearing!