How to Fix Elf Bar BC5000 Burnt Taste: Quick Solutions.


To fix the burnt taste in elf bar bc5000, clean the coil and ensure you do not overuse the device. If you are facing a burnt taste issue in your elf bar bc5000, don’t worry, it’s a common problem that can be fixed easily.

The burnt taste can occur due to several reasons, such as an overused coil, low e-liquid level, or high wattage setting. The best way to fix the burnt taste is by cleaning the coil properly or replacing it with a new one.

Additionally, make sure that you do not overuse the device and keep the e-liquid level above the minimum mark. In this article, we’ll discuss the causes of burnt taste and provide some practical solutions to fix the issue.

How to Fix Elf Bar BC5000 Burnt Taste: Quick Solutions.


Understanding The Problem

What Is The Elf Bar Bc5000 Vape Device And How Does It Work?

The elf bar bc5000 vape device is a compact and easy-to-use electronic cigarette that is increasingly becoming popular in the vaping world. It features a pre-filled e-liquid capacity of 4 ml and a 650mah battery. The device works automatically, meaning that there are no buttons to push or switches to turn on/off.

When you inhale, a sensor in the device activates the atomizer, heating up the e-liquid and turning it into vapor.

What Causes Burnt Taste When Using The Elf Bar Bc5000?

Even though the elf bar bc5000 is an excellent device, it is not immune to the occasional burnt taste that can ruin your vape experience. Burnt taste is often a result of the following factors:

  • Chain vaping
  • A worn-out coil that needs replacement
  • Not priming the coil or cartridge adequately
  • Using the wrong power settings
  • Using expired or low-quality e-liquid

Why Is It Important To Fix The Burnt Taste Problem?

Fixing the burnt taste problem is essential for anyone who wants to continue enjoying a fantastic and consistent vaping experience. A burnt taste can render your device unusable for sometimes extended periods, forcing you to spend more money on replacements and make your vaping adventure frustrating.

Additionally, vaping with a burnt taste can also harm your health by exposing you to toxins and harmful chemicals which may have consequences in the long run. Therefore, fixing the issue immediately is crucial for both your pockets and your wellbeing.

Common Solutions To Fix Burnt Taste On Elf Bar Bc5000

If you’re an elf bar bc5000 user, experiencing burnt taste while vaping is a common issue. This can be caused by different factors like low-quality e-liquid, coil buildup or incorrect wattage settings. But don’t let this problem ruin your vaping experience.

Here are some common solutions you can try to fix burnt taste on elf bar bc5000:

Cleaning The Coil: Step-By-Step Guide

One of the reasons for burnt taste in elf bar bc5000 is due to a dirty coil. To prevent this, proper cleaning is necessary. Here’s how you can do it:

  • Disassemble your vape pen and remove the coil from the base.
  • Rinse the coil under running water to remove any e-liquid residue.
  • Use a soft-bristled brush to scrub the coil gently and remove any buildup.
  • (optional) soak the coil in distilled water or vodka for 30 minutes to loosen the buildup.
  • Rinse the coil thoroughly with water and let it dry.
  • Reinstall the coil to the base, fill the tank with your e-liquid of choice and start vaping again.

Adjusting The Wattage Settings

Another common reason for burnt taste is the incorrect set-up of wattage settings. It’s essential to adjust the wattage to match the coil and e-liquid you’re using. Here’s how you can do it:

  • Check the recommended wattage range for your coil. This information can be found on the coil’s packaging or manufacturer’s website.
  • Set the wattage to the lower end of the recommended range.
  • Start vaping and gradually increase the wattage until you find the sweet spot that provides the optimal flavor.
  • Avoid setting the wattage too high as this can cause a burnt taste.

Changing The Coil

If you’ve cleaned the coil, adjusted the wattage settings, and still experience a burnt taste, it may be time to change the coil. Here’s how you can do it:

  • Disassemble your vape pen and remove the base from the tank.
  • Unscrew the old coil from the base and discard it.
  • Screw the new coil onto the base and tighten it.
  • Reassemble the vape pen and fill the tank with your e-liquid of choice.
  • Let the vape pen sit for a few minutes to allow the new coil to soak-up the e-liquid.
  • Start vaping and enjoying the fresh flavor without any burnt taste!

Replacing The E-Liquid

If none of the above worked, the last solution you can try is replacing the e-liquid. Sometimes, burnt taste can be due to low-quality e-liquid or an expired one. Here’s how you can do it:

  • Empty the tank of the old e-liquid.
  • Clean the tank to remove any e-liquid residue left.
  • Refill the tank with a new e-liquid of your choice.
  • Let the vape pen sit for a few minutes to allow the e-liquid to soak into the coil.
  • Start vaping and experience a fresh new flavor!

Burnt taste is a common issue with elf bar bc5000, but it doesn’t have to be a nuisance. By following the steps provided, you can quickly fix the problem and continue to enjoy an optimal vaping experience.

Advanced Solutions To Fix Burnt Taste On Elf Bar Bc5000

If you’re tired of the unpleasant burnt taste on your elf bar bc5000, upgrading the device firmware and modifying the wick and coil are advanced solutions that could help avoid this issue. Additionally, following some tips for temperature control could also help to keep your device running smoothly, and below, we’ll cover all of these options in detail.

Upgrading The Device Firmware

Upgrading to the latest firmware version can significantly improve the flavour and performance of your elf bar bc5000. Here are a few things to keep in mind when updating your device’s firmware:

  • Visit the official elf bar website to download the latest firmware version.
  • Connect your device to your computer and open the firmware update tool.
  • Follow the on-screen instructions to update the firmware.
  • If your device already has the latest firmware version, check for firmware updates periodically to ensure you are always up to date.

Modifying The Wick And Coil

If upgrading the firmware doesn’t help fix the burnt taste issue, modifying the wick and coil can be another advanced solution. Here are a few tips to consider:

  • Try using a lower resistance coil, as this can help reduce the amount of heat applied to the wick and prevent burning.
  • Make sure to properly saturate the wick with e-liquid before vaping.
  • If you’re using a rebuildable atomizer, make sure the coil is not touching the wick, as this can also lead to a burnt taste.
  • Avoid chain vaping to allow time for the wick to re-saturate with e-liquid between puffs.

Tips For Temperature Control

Finally, a few tips for temperature control can also help prevent burnt taste on your elf bar bc5000:

  • Make sure to read the user manual to understand how to adjust the temperature settings on your device.
  • Start with low temperatures and gradually increase until you find your preferred setting.
  • Be mindful of the pg/vg ratio of your e-liquid, as this can affect the temperature required to avoid burnt taste.
  • Take a break between puffs to allow time for the device to cool down.

By following these advanced solutions and tips for temperature control, you can avoid the unpleasant burnt taste on your elf bar bc5000 and enjoy a smoother vaping experience.

Frequently Asked Questions (Faqs)

Why Does My Elf Bar Bc5000 Device Keep Getting Burnt Taste?

If your elf bar bc5000 device is producing a burnt taste, there are several reasons why this might happen. Here are some key points to help you understand why you might be experiencing this issue:

  • It’s likely that your device is heating up too quickly, which can cause the e-liquid to burn and produce a burnt flavor. This might be due to a damaged coil or a coil that needs to be replaced.
  • If you’re using a high-wattage setting on your device, this can also lead to burnt taste. The higher the wattage, the faster your device will heat up, and the more likely it is to produce a burnt flavor.
  • It’s also possible that your e-liquid is running low, causing the coil to burn. Make sure your tank is adequately filled at all times to avoid this.

How Often Should I Clean My Elf Bar Bc5000 Coil To Avoid Burnt Taste?

Cleaning your elf bar bc5000 coil is essential to avoid burnt tastes. Here are some key points to guide you on how often you should clean your coil:

  • It’s generally recommended to clean your coil every week or two, depending on how often you use your device. This is because e-liquid can build upon the coil over time, and cleaning it will help to remove any residue that can cause a burnt taste.
  • Some signs that your coil needs cleaning include reduced vapor production, a change in flavor, or a burnt taste.
  • When cleaning your coil, make sure to disassemble your device and remove the coil from the tank. Soak it in warm water or isopropyl alcohol for at least an hour, rinse it thoroughly, and let it air dry before reassembling your device.

How Can I Prevent Burnt Taste In Future When Using Elf Bar Bc5000?

To avoid burnt tastes in the future, here are some key points that you can consider:

  • Choose the correct wattage or temperature setting for your device. Higher wattages and temperatures will produce more vapor, but also increase the chance of a burnt taste.
  • Make sure to properly prime your coil before using your device. This means saturating the cotton inside the coil with e-liquid and letting it sit for a few minutes before using your device.
  • Avoid chain vaping, which means taking continuous puffs without waiting for your device’s coil to cool down. This can cause your coil to overheat and lead to a burnt taste.
  • Keep your device properly maintained by regularly cleaning the tank and coil. This will help to prevent any buildup of gunk that can cause a burnt taste.

Is It Safe To Use Modified Wick And Coil In Elf Bar Bc5000?

Using a modified wick and coil can be dangerous, as it can lead to issues such as short circuits or coil misfires. Here are some key points to consider when using modified wick and coil in elf bar bc5000:

  • Modifying your wick and coil can void your device’s warranty, so make sure to use caution if you decide to make any modifications.
  • If you’re unsure whether a particular coil or wick is safe to use, you should consult with a professional or look for information online. Some modifications may require specific knowledge and expertise in order to be executed safely.
  • It’s always recommended to use genuine replacement parts for your device, as they are designed to be used with your device and are therefore less likely to cause issues.

Remember that preventing burnt tastes in your elf bar bc5000 device can help you achieve a better vaping experience. Ensure that your device is properly maintained at all times, and if you experience any issues with a burnt taste, try the solutions mentioned in this post.

Frequently Asked Questions For How To Fix Elf Bar Bc5000 Burnt Taste

How Do I Know If My Elf Bar Bc5000 Tastes Burnt?

If your elf bar bc5000 produces a distinctly burnt taste, then it is a clear indicator of you experiencing the ‘burnt coil’ problem. Most of the time, it happens because your tank is low on e-liquid, or your wattage setting is too high for the coil to handle.

How Can I Avoid The Burnt Coil Problem With Elf Bar Bc5000?

You can avoid the burnt coil problem with elf bar bc5000 by keeping some things in consideration. Firstly, always ensure your tank is full (3/4th) with e-liquid, and regularly check the coil for any hot spots that may cause burnt taste.

Secondly, be mindful of the wattage setting and juice ratios.

How Can I Fix The Burnt Taste Of Elf Bar Bc5000?

If you’re experiencing a burnt taste from your elf bar bc5000, one thing you can do is check the wattage at which the device is set. If it’s too high, reduce it and see if it fixes the problem. You can also try priming the coil and cleaning your device.

How Often Should I Change The Coil In Elf Bar Bc5000?

You should change the elf bar bc5000 coil every two weeks or when the coil starts to give off a burnt taste. The life of the coil depends on various factors such as usage frequency, wattage settings, and types of juice used.

How Do I Prime The Coil In Elf Bar Bc5000?

To prime the coil in elf bar bc5000, fill the tank with e-liquid and let it sit for 5-10 minutes. This will allow the e-liquid to saturate the cotton wick and ensure it’s ready for use. Once this is done, you can adjust the wattage to your preference and vape as usual.


To sum it up, dealing with a burnt taste from your elf bar bc5000 can be frustrating and disappointing, especially if you are new to vaping. However, by following the tips discussed in this guide, you can easily fix this problem and enjoy a pleasant vaping experience once again.

From adjusting your wattage settings to cleaning the coils regularly and priming your coils properly, these simple steps can help you prevent or deal with a burnt taste effectively. By taking the time to understand your device and its functions, you can also troubleshoot other potential issues and ensure your device works optimally for a longer time.

So, give these solutions a try and enjoy your elf bar bc5000 to the fullest!

Latest articles


Related articles

Leave a reply

Please enter your comment!
Please enter your name here